Adjustable Cantilever Workbenches
- Sylish design with good leg room
- Height adjustable from 700 to 1000mm by allen key, hand crank or electric motor
- Flush bench foot print
- 25mm laminate particle board worktops
- Electric motor takes 19 seconds
Adjustable cantilever workbenches are ideal for workshops with varied roles and several workers. The workbench height can be set when first assembled to suit your workforce, and with the hand crank and electric motor versions, the height can also be adjusted easily as required. With many accessories to choose from, the workbench can fulfil almost any workshop requirement. Ideal for standing or seated work. Working loads: 250kg (Allen Key), 200kg (Hand Crank), 200kg (Electric Motor).
Configuring you workbench
- Full-Width over-bench accessories are mounted on upright profiles.
- Smaller modules are mounted on an accessory frame.
When Adding A Tilting Shelf And/Or Bin Rail Please Note:
- 1200mm wide benches accept 1x100 module (tilting shelf or bin rail) - Requires uprights.
- 1500mm wide benches accept 2x70 modules (tilting shelf and bin rail) - Requires uprights & accessory frame.
- 1800mm wide benches accept 1x70 module and 1x100 module (tilting shelf and bin rail) - Requires uprights & accessory frame.
Needed for upright mounting accessories. 2 x 900mm uprights and horizontal profile.
Needed for accessory mounting accessories. 1 x 500mm upright and horizontal profile.
Height adjustable 25mm shelves. Mounts on upright. Load capacity: 50kg.
Steel bracket for tools & HiLite LED overhead light. Mounts on upright.
HiLite LED Overhead Light
Suited to lighting tasks that require precision such as assembly or inspection. 1,800 lux & 4000K
Pre-wired flicker free bulbs. Asjusts for angle. Side light mounts on upright.
Adjusts for height, angle and depth. Mounts on accessory frame. Load capacity: 30kg.
Aluminium profile bin rail. Mounts on accessory frame. Accepts most bins.
Mounts on accessory frame. For LCD monitors with VESA 75 or 100 fittings. Arm moves from 95-425mm.
PC Stand & Keyboard Shelf
Mounted under worktop. PC holder adjusts from 395-500mm height & 130240mm width. Keyboard tray is 250 x 500 x 110mm and includes pull-out mouse mat.
Used with 2 benches to create a 90 degree angle.
UK BS 1363 power sockets with one neon on/off switch. 3m mains cable. 3A plug UK BS 1363.